Hydraulic hose assembly is more important, hydraulic hose assembly properly, to extend the service life of hydraulic hoses to improve the efficiency of use and reduce the occurrence of failure. On the contrary, improper assembly of hydraulic hoses can lead to premature damage of the hydraulic hoses, which may lead to oil spills, increase the number of repairs and replacements, and increase the economic cost.
Hydraulic hose assembly, if the amount of pressure is too small, that is, the pressure between the joint and hydraulic hose too loose, the role of the hydraulic pressure in the early use of hydraulic hose may be out from the connector; if the amount of overpressure , Then the joint and the hydraulic hose too much pressure, easy to lead to local damage to the hydraulic hose, resulting in cracks, high-pressure oil from the rupture directly into the wire layer, and then along the gap between the steel wire fleeing coat tail, Or has been along the wire layer to sneak up somewhere, so that the outer layer of plastic produced drums or even rupture. Hydraulic hose and fittings in the assembly, if the fast withholding speed, likely to damage the inner plastic and steel wire layer breakage, so that the hose in the use of premature damage.
When assembling hydraulic hose joints, in addition to ensuring the appropriate principle of elastic, but also pay attention to select the matching hose connector, to avoid the choice of material is not matching the hydraulic hose connector assembly problems.